OUR MANUFACTURING PARTNERS

YOUR PERFECT CLIMATE

Munters is a global leader in energy-efficient and sustainable air treatment solutions. Using innovative technologies, Munters creates the perfect climate for demanding industrial applications, the largest being the food, pharmaceutical, and agriculture sectors. As a manufacturer of industrial and commercial indoor climate control systems, Munters has been defining the future of air treatment since its founding in 1955

Dehumidification
Cooling
Heating
Energy Recovery
Humidification
Mass Transfer

Rentals
Mist Elimination
Ventilation
High-Temperature
Combined Temp/RH
Pollution Control & VOC Abatement

*Global presence with sales and manufacturing in 30 markets
*Around 3,700 employees
*18 manufacturing plants, 7 smaller assembly hubs, and 55 sales and service centers
*Installed base of more than 220,000 air treatment systems

INDUSTRIAL DESICCANT DEHUMIDIFIERS

Munters manufactures and services humidity control desiccant dehumidification systems available for application down to -90F dew points. These systems are designed to remove moisture from the air to control humidity in commercial buildings and industrial processes. Munters systems are used by more than 20 major industries in hundreds of applications.

Industrial dehumidification systems have become increasingly popular in recent years because of lower equipment costs achieved through economies of scale, modular designs, and the use of desiccant silica gel wheels.

Munters desiccant dehumidification systems remove moisture from the air by using a desiccant; a material which easily attracts and holds water vapor.
Desiccant dehumidifiers are especially well-suited for removing moisture from air at a low temperature and low humidity level.
At the heart of these dehumidifiers is a patented desiccant wheel made up of corrugated material. Air passes through the flutes of the material, contacting the desiccant.

The incoming process air stream gives off its moisture to the desiccant. The process air is dry as it leaves the wheel. The humidity-laden wheel rotates slowly into a second, smaller airstream which has been heated.
This smaller exhaust airstream, known as reactivation air, warms the desiccant. The warmed desiccant gives off its moisture which is then carried away by the reactivation air.
The newly dried desiccant material is rotated back into the process air, where it absorbs moisture once again.

Energy-efficient solutions for air treatment and climate control technologies

Integrated Custom Air Handler (ICA)

Munters Integrated Custom Air Handler (ICA) incorporates many advanced features including an innovative double wall construction, including the system base, that incorporates a superior no-through metal design in either 2.5 or 4 inch wall thickness. Surface options of Galvalume, textured aluminum, stainless steel or any combination permit an effective choice for all operational environments.

System capacities from 500 to over 100,000 cfm.

The ICA is especially suitable for food processing and pharmaceutical manufacturing applications that operate under strict FDA and GMP sanitation requirements. Units can be customized to meet most any requirement.

Energy efficient
30-99% HEPA filters
No-through metal design prevents sweating
Full contact rotor seal

Advanced selection software
Purge configuration for low dew point conditions
Utilizes PowerPurge® technology

HCD Series

Munters HCD series desiccant dehumidifiers are designed to efficiently dehumidify to low moisture levels. Process airflows are available from 300 to 12000 CFM. Unit casing is manufactured of fully welded, strain hardened aluminum to ensure zero air leakage.

Cooling

Munters is a global leader in evaporative cooling solutions for numerous applications. Munters technology for direct and indirect evaporative air cooling is sustainable and energy efficient as it uses the natures own way of cooling.

direct evaporative cooling

indirect evaporative cooling

Energy Recovery

With the world’s focus on sustainability and energy costs combined with indoor air quality and lower first cost without impacting quality, engineers are challenged to design energy efficient air handlers while keeping capital costs low. Adding to that challenge is the fast pace of technology and the demand for quicker turnaround times.

The most recent improvement on energy reduction for desiccant wheel (rotor) systems is the Munters PowerPurge™.
With this patented technology, energy reductions up to 30% on bigger size systems are possible.

And in some cases a smaller dehumidifier with PowerPurge™ can do the same job as a bigger unit.
An effective way to lower your investment cost.

HEAT EXCHANGERS

Z-Duct® Plate (Foil) Type Air-to-Air Heat Exchangers

Whether packaged in a unit or applied as a stand-alone plate heat exchanger, the Z-Duct® will reduce cooling requirements in the summer and reduce heating requirements in the winter.

Thermo-Z® Welded Plate Heat Exchanger

The Thermo-Z® plate style heat exchanger is designed to recover heat from energy consuming processes up to 1500°F. Energy can be recovered and returned as process make-up air, used to preheat combustion air, or used for plant or office heating.

High Temperature Heat Exchangers / Heat Exchangers Thermo-T® Welded Tubular Heat Exchanger

The Thermo-T® tubular heat-exchanger is designed to recover heat from energy-consuming processes up to 2000°F. Energy can be recovered and returned as process make-up air, used to preheat combustion air, or used for plant or office heating. Thermo-T® offers fully adjustable tube-size and tube-spacing as well as both single-pass and multi-pass models.

Munters offers robust and quality industrial and commercial desiccant dehumidification systems for various applications.

ALL MUNTERS REPLACEMENT PARTS ARE NOW AVAILABLE DIRECTLY FROM ICE.

We will even stock and warehouse commonly used Munters parts for your convenience.
Please contact ICE directly at 732-309-3898 for fast and local replacement parts service.